How Do You Make a Cricut Vinyl Holder?

Making a Cricut Vinyl Holder can be a great way to store and organize all your vinyl rolls. In this tutorial, we will go over the steps to make a simple, fun wall-mounted holder that will hold up to 10 rolls of vinyl.

Step 1: Gather Supplies
You will need the following supplies for this project:

  • 1 sheet of medium-density fiberboard (MDF) at least 18″x24″
  • 1 piece of ¾” plywood at least 24”x24”
  • 3 pieces of ¼” MDF at least 24”x6”
  • 2 pieces of 2×4 lumber at least 24” long
  • Wood glue
  • Screws or nails
  • Paint or stain of your choice

Step 2: Cut the MDF and Plywood Pieces
Using a circular saw, cut the MDF and plywood pieces into the following sizes:

  • MDF Sheet:

    • 2 pieces at 18″x6″

    • 4 pieces at 6″x6″

    • 1 piece at 24″x18″

>Step 3: Assemble the Frame
Using wood glue and screws or nails, assemble the frame as shown in the diagram below. Make sure all corners are square.

Cricut Vinyl Holder Diagram

(Image credit: Sarah O’Brien)

Once assembled, let it dry for several hours.

>Step 4: Assemble the Shelves

Lay out one of the 6″x6″ MDF pieces and one of the 24″x6″ ¼” MDF strips on a flat surface. Apply wood glue along one edge of the ¼” strip and sandwich it between two 6″x6″ MDF pieces.

Secure in place with screws.

Repeat this step to assemble two additional shelves.

>Step 5: Attach Shelves to Frame

Attach each shelf assembly to the frame using screws or nails.

>Step 6: Attach Back Piece

Lay out the 18” x 24” back piece on top of frame and attach with screws or nails.

>Step 7: Finish With Paint or Stain Once all parts have been assembled, finish with paint or stain of your choice.>Conclusion: Making a Cricut Vinyl Holder is an easy project that can help you keep your vinyl rolls organized and accessible. With just a few materials and tools, you can build your own custom holder in no time!