How Do I Make Cricut Dust Cover?

Making your own Cricut dust cover is a great way to protect your machine from dust, dirt, and spills. Not only will it keep your machine clean, but it will also help keep it safe from any accidental damage that may occur while you’re working.

Plus, if you make a dust cover yourself, it can be customized to fit the exact dimensions of your Cricut machine. Here’s how you can make a Cricut dust cover:

1. Measure the dimensions of your Cricut machine to get an accurate size for your dust cover. You’ll need to measure the length and width of the machine, as well as its height.

2. Choose a fabric that is sturdy enough to protect your Cricut from any spills or dust particles that may come in contact with it. Vinyl or canvas are good options for this project.

3. Cut out two pieces of fabric that are slightly larger than the measurements you took in step 1. The extra fabric will be used for hemming and seam allowance.

4. Place the two pieces of fabric right sides together and sew around all four sides using a straight stitch on your sewing machine.

5. Turn the cover right side out and press it with an iron so that all seams are flat.


Hem all four sides by folding the edges over twice and stitching them down.

7. Make sure to leave an opening at one end for inserting elastic bands or drawstrings for fitting around your Cricut.

8. Insert elastic bands into each corner of the opening and tie knots at both ends.

9. Place the cover over your Cricut machine and secure with the elastic bands or drawstrings


10. Finally, give your custom-made dust cover one last press with an iron before using it!


Making a custom-fit dust cover for your Cricut is easy and can be done in just a few simple steps using common materials found at any craft store! With this DIY project, you’ll have a stylish way to keep your machine safe from spills and dirt while looking good too!


In conclusion, making a Cricut dust cover requires measuring out fabric pieces slightly larger than needed along with sewing them together to create an envelope shape with an open end for securing elastic bands or drawstrings for fitting around the machine itself.


With these steps followed carefully, you can easily make a custom-fit dust cover for your belovedCricut machine in no time!