Mylar is a popular material for crafters, hobbyists and artists alike. It’s a sturdy, heat-resistant film that can be cut with die-cutting machines such as the Cricut.
Mylar is perfect for creating stickers, labels and other paper crafts that require a durable material. But when it comes to using a Cricut machine to cut Mylar, there are several settings that you need to know about in order to achieve the best results.
Blade Depth: The most important setting when cutting Mylar with a Cricut is the blade depth. You’ll want to set your blade depth to the deepest setting on your machine – usually this will be a 3 or 4. This will ensure that the blade can penetrate through the thickest part of Mylar without tearing or damaging it.
Cutting Speed: The speed at which you cut Mylar also matters. You’ll want to set your cutting speed to medium or higher so that it cuts through the material quickly and cleanly without leaving any jagged edges or tears.
Force Setting: The force setting determines how much pressure is applied when cutting through Mylar. You’ll want to set this as high as possible without causing any damage to your machine or material. Generally, this will be somewhere between 200 and 500 grams depending on the thickness of your material.
Multi-Cutting: Multi-cutting allows you to cut multiple layers of Mylar in one pass. This is especially useful if you’re working with thicker materials such as cardstock or vinyl. To use multi-cutting, make sure you select “multi-cut” in your machine settings before beginning your project.
Conclusion:
When it comes to cutting Mylar with a Cricut machine, it’s important that you get the settings right in order to achieve best results. Make sure you adjust the blade depth, cutting speed and force setting accordingly; and if needed you can use multi-cutting for thicker materials such as cardstock or vinyl.
What Cricut Setting for Mylar?
The best Cricut settings for cutting mylar are deep blade depth (usually 3 or 4), medium or higher cutting speed and high force setting (200-500g). Additionally, use multi-cutting if needed for thicker materials such as cardstock or vinyl.