Are you a proud owner of a vintage Hermes 3000 typewriter? If so, you might be wondering how to open it up for maintenance or repair purposes. In this tutorial, we will guide you through the steps on how to open a Hermes 3000 typewriter.
Step 1: Gather your tools
Before you start opening up your typewriter, you will need some tools. Here is a list of what you’ll need:
- A small Phillips-head screwdriver
- A flathead screwdriver
- A pair of pliers
Step 2: Release the carriage lock
The first thing you need to do is release the carriage lock. This lock is located on the right-hand side of the typewriter, near the carriage return lever. To release it, simply push it down.
Step 3: Remove the ribbon cover and spools
Next, remove the ribbon cover by gently pulling it towards you. Once removed, take out both spools and put them aside.
Step 4: Remove the paper tray
The paper tray is located at the front of the typewriter. To remove it, pull it towards you while pushing down on both sides.
Step 5: Remove the outer casing screws
Using your Phillips-head screwdriver, remove all the screws located at the bottom and back of your typewriter.
Step 6: Remove the inner casing screws
Once all outer casing screws have been removed, flip your typewriter over and remove all inner casing screws using your Phillips-head screwdriver as well.
Note:
Some models might have additional screws under rubber feet or behind labels that need to be removed before proceeding.
Step 7: Remove the casing
Now that all screws have been removed, carefully lift the casing off the typewriter. You might need to use your flathead screwdriver or pliers to gently pry it open.
Step 8: Access the inner parts
With the casing removed, you now have access to all the inner parts of your typewriter. You can clean and oil them as needed, or replace any broken parts.
Note:
Be sure to consult a professional if you are not skilled in typewriter repair or maintenance.
Conclusion
Opening up a Hermes 3000 typewriter might seem daunting at first, but with the right tools and instructions, it can be done with ease. Remember to always be careful when working with delicate machinery and seek professional help if needed. Good luck with your repairs!