Cutting big designs with a Silhouette Cameo is not impossible, but it can be tricky. It requires patience and attention to detail. To get the best results, it’s important to understand the guidelines and techniques for cutting large designs with a Silhouette Cameo.
Gather the Supplies You’ll Need
Before you start cutting your design, make sure you have all of the supplies you need. You will need your Silhouette Cameo machine, a cutting mat, a blade, and the material you are cutting. Depending on your project, you may also need transfer paper or adhesive vinyl.
Prepare Your Design
Before sending your design to be cut by the Silhouette Cameo, you should prepare it in Silhouette Studio. Make sure all of the elements are properly aligned and sized before sending it to be cut. If there are multiple pieces that will be cut separately, make sure they are grouped together.
Load Your Material onto the Cutting Mat
Once your design is ready to go, load your material onto the cutting mat. Place it onto the mat in such a way that there is no overlap between pieces or designs.
This will help ensure that each element of your design is cut accurately.
Adjust Your Settings in Silhouette Studio
Most materials require different settings when being cut with a Silhouette Cameo. In order to get accurate cuts when cutting large designs with a Silhouette Cameo, adjust the settings so they match up with whatever material you’re using. Make sure to adjust both blade depth and speed as needed.
Cut Your Design
Once everything is prepared and set up correctly, send your design to be cut by pressing “Send” in Silhouette Studio. Depending on how large your design is, this could take some time so be patient while it cuts.
.
Remove Your Design from the Cutting Mat.
When your design has finished cutting remove it from the mat carefully using an x-acto knife or tweezers if needed. Once removed inspect each piece for any imperfections or issues that may have occurred during cutting.
.
Cutting large designs with a Silhouette Cameo requires patience and attention to detail. Gather all of the necessary supplies before starting such as transfer paper or adhesive vinyl if needed then prepare your design in Silhouette Studio before loading your material onto the cutting mat and adjusting settings accordingly . Finally send your design for cutting and inspect each piece for any possible imperfections after removing from the mat.