How Do I Change the Housing on My Cricut?

Changing the housing of a Cricut machine is fairly simple and can be done in just a few steps. First, locate the two small screws that hold the housing together on either side of the machine.

Unscrew those two screws and then gently pull the two halves away from each other. Once the two halves are apart, you’ll need to remove all of the existing wiring and components from the old housing. This can be done with a pair of needle nose pliers or tweezers.

Next, install the new housing onto your Cricut machine by placing it over top of where the old housing was located. Line up all of the holes for wiring and components with their respective places on the new housing, then use a screwdriver to tighten down all of the screws securely. Make sure to not overtighten any of them as this could cause damage to your Cricut machine’s internal components.

Once you’ve finished tightening down all of the screws, you’ll need to re-connect all of your Cricut’s wiring and components into their respective places on the new housing. Make sure that each connection is secure before moving onto the next one, as this will ensure optimal performance from your Cricut machine.

Finally, once you have re-connected everything and confirmed that it is working properly, you can re-attach both halves of your Cricut’s housing. Tighten down both screws securely to ensure that everything remains in place during use.

In conclusion, changing out your Cricut’s housing is a fairly straightforward process that requires a few basic tools and some patience. All it takes is unscrewing two small screws, removing any wires or components from the old housing, installing the new one, reconnecting all wiring/components and tightening down both halves with their respective screws – and you’ll soon have a brand new look for your Cricut!