When creating a design with a cutting machine, it can be frustrating to find out that your Silhouette is only cutting part of your design. This could be caused by a variety of things, such as incorrect settings or using the wrong materials. Here are some tips to help you troubleshoot why your Silhouette might not be cutting all of your design.
Incorrect Settings
The most common cause of incomplete cutting is incorrect settings. To ensure that all parts of the design are cut, make sure the blade depth and speed settings are appropriate for the material being used.
For example, thicker materials should have deeper blade depths and slower speeds than thinner materials. Additionally, you should adjust the blade pressure setting and turn off double cut if you’re having trouble with parts of the design not being cut.
Wrong Materials
Another potential cause for incomplete cutting is using materials that aren’t compatible with your machine. Make sure you check what type of materials can be used with your Silhouette before attempting to use something new. Additionally, if you’re having trouble with certain types of paper or fabric, try changing up the blade depth and speed settings until you find one that works.
Clogged Blades
If your blades become clogged or dull, they won’t be able to properly cut through material. If this happens, take apart the blades and clean them off using a soft cloth and rubbing alcohol. You can also try sharpening them with a sharpening stone or sandpaper to get them back in working condition.
Conclusion
In conclusion, there are many reasons why a Silhouette might not be cutting all of your design – from incorrect settings to clogged blades. Make sure you adjust the correct settings for each material type and clean off any clogged blades if necessary to ensure that all parts of your design get cut properly.
Why Is My Silhouette Only Cutting Part Of My Design?
The most likely cause for an incompletely cut design is incorrect settings or using incompatible materials. Adjusting the blade depth and speed settings appropriately for each material type will ensure that all parts of your design get cut properly. Additionally, taking apart and cleaning any clogged blades can also help improve performance.